Technology Parameter
Specification: 100×90×18.8mm     Color: Yellow, White，etc.
1. Putting an end to the "shelling" phenomenon: adopting high-intensity plastic（without
    fill）body
2. Avoiding "shelling" phenomenon to the fullest extent：furnished  with installation hole
    using steel shooting gun（while on the cement road ,  you should first drill a hole and
    put expansion pipe as well as screw）and adhesive to fix it on the asphalt road
3. Shorten the construction cycle. You don't have to set road barrier and let people watch
    after finish installing and cars could go immediately.
4. Both of its loading and impact strength exceed ministry of communications standard.
5. Its illuminant intensity parameter is 3-4 times that of communications ministry first-class
    products'.
6. Its chemistry capability index conforms to and exceeds the ministry of communications
    standard
7. Its aging resistance capability is2-3times the engineering project plastics' and applicable
    environment temperature is -40～+65℃
8. Application range ：Decelerating line, central line, lane line, edge line and so on.
Installation Method:
Asphalt road:
1. clean the road  
2. put glue on
3. put the  spike  in the  installation hole of high-intensity plastic road stud by spike-shooting gun
Cement road:
1. drill a hole in the proper place and put the expansion pipe 
2. clean the road
3. put glue on  
4. thread the screw in the installation hole of high-intensity plastic road stud